You need to Read the rules and Join the forums before you can post.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Custom PC no signal on monitor
09-29-2014, 02:48 AM,
#1
New Custom PC no signal on monitor
This is my PC spec
Intel Xeon E3-1231v3 LGA1150
Asus Z97M-PLUS motherboard
Kingston Fury Red Series 8GB (X1)
Kingston Fury 120GB 2.5" Solid State Drive
Western Digital Caviar Blue 500GB 3.5" 7200RPM Internal Hard Drive
NVIDIA Quadro K600 1GB
Cooler Master Elite Power 460W ATX Power Supply


Anyone can help me with this custom new pc ? First try the monitor show me that NO SIGNAL, (the monitor is working fine)

Tried to replug cable at the motherboard, remove the graphic card, replug the ram but in the end still NO SIGNAL.
Reply
09-29-2014, 04:39 PM, (This post was last modified: 09-29-2014, 04:40 PM by Rapajez.)
#2
RE: New Custom PC no signal on monitor
Some of these may sound dumb, but just to be sure:

You've plugged the monitor into the Graphics Card, not the motherboard, correct?

What type of cable are you using? DVI-I, HDMI? Are you using any converters?

Does the PC appear to power up when you press power? Is there an LED display on the motherboard that's stuck a particular number?
GPU: NVIDIA Titan X, CPU: Intel Core i5-3570K Ivy Bridge 3.4GHz OC'd @ 4.5GHz, Mobo: ASRock Z77 Extreme4, Mem: 2x Corsair Dominator 2133MHz 8GB, SSD: Samsung 850 EVO, Case: Corsair Carbide 500R, PSU: Corsair TX850M, CPU Cooler: Noctua NH-D14, Case Fans: 4x Cooler Master Excalibur 120mm PWM, Monitors: 3x ViewSonic VX2270SMH-LED in NVIDIA Surround
Reply
09-29-2014, 08:07 PM,
#3
RE: New Custom PC no signal on monitor
I had a similar issue with a new monitor I bought. If the monitor has multiple ways that it takes video, make sure that it is set to receive that type. Like right out of the box it was set to take in dvi and I had to change it to hdmi via a button on the side.
Here are some links you may find useful.
Forum Rules - Introduce Yourself - Things to know before asking a question
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)