You need to Read the rules and Join the forums before you can post.
Thread Rating:
Finished my first build
|
10-05-2012, 01:01 AM,
|
|||
|
|||
Finished my first build
Cheers to everyone that answered any of my questions in the past and the many HR articles that helped me come to a decision on my choice of components. Took me five hours last night but very happy with the so far.
Beast Internal Specs: HAF X v2 case Gigabyte Z77-UD5H mobo i5 3570k cpu 8Gb XMS3 1.5v NZXT Hale90 Sandisk Extreme 240Gb Sony DVD Drive Adding a 680 DirectCU II TOP and a Phantek cooler at the end of the month so it'll be a wee while till I'm totally done but 90% of the hard work is completed now. Cable management is better that I would have hoped for but annoyingly I couldn't route the additional cpu power lead behind the mobo and back in the top. Might pop the connectors at the bottom out and at least squeeze it behind the psu a bit better. The back is still a bit of a mess but I reckon some judicious use of cable ties will improve that no end. |
|||
10-05-2012, 09:06 AM,
|
|||
|
|||
RE: Finished my first build
Nicely done, congrats on the successful build! Enjoy
![]() Follow Me on Twitter
CPU: Intel i5 2500k Motherboard: ASRock Extreme 3 Gen 3 Z68 Video Card: Sapphire Radeon 6870 Memory: Corsair Vengeance 8gb Power Supply: Rosewill Hive 550w Storage: Seagate Barracuda 1TB Case: Antec 300 Illusion Monitor: ASUS 23" 5ms 1080p Mouse: Logitech G500 |
|||
10-05-2012, 12:37 PM,
(This post was last modified: 10-05-2012, 12:37 PM by Brandonsr.)
|
|||
|
|||
RE: Finished my first build
Looks Great! The onboard graphics is pretty decent, so you should be able to play games on low settings before the new card arrives. And congrats on the successful build
![]() Case: Corsair Carbide Air 540 CPU: i5 3570K Cooler: Water Loop Motherboard: ASrock Extreme 3 Gen 3 Z68
Memory: Corsair Vengeance 8gb] Video Card: EVGA GTX 1070 FE Power Supply: Corsair TX 750w Storage: Samsung 840 120gb Monitor: Acer S231HLbid 23" Mouse: RAZER DeathAdder 3.5G Keyboard: Ducky DK9008G2 PRO MX Cherry Blue |
|||
10-05-2012, 01:07 PM,
(This post was last modified: 10-05-2012, 01:08 PM by theirongiant.)
|
|||
|
|||
RE: Finished my first build
Cheers guys, i'm well chuffed i managed to do it, only moment of doubt was when I did the first bootup with just the cpu and ram installed. The LED display on the mobo started flashing up numbers and i totally panicked, switched it off and shakily read the manual to see what dire condition it was in. Found out the it's not just error codes it displays
![]() Made a mental note of that point for future. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread: 2 Guest(s)