You need to Read the rules and Join the forums before you can post.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AMD 6970's Eyefinity Three Monitor Setup Problem
12-14-2011, 08:36 PM, (This post was last modified: 12-14-2011, 08:44 PM by SnyderMan.)
#3
RE: AMD 6970's Eyefinity Three Monitor Setup Problem
(12-14-2011, 07:41 PM)windez Wrote: Ok, what monitors are you using and what is the exact name of the DP adapter.

Also make sure your DVI adapter is getting power. Also make sure all three cables are connected to the SAME 6970, the one closest to your cpu.

Also, is the third monitor registering with amd CCP (the AMD Control Center)?
Also I'm curious as to whether that as an active or passive adapter.

I'm using three Planar PX2710MW's. All three are plugged into the same graphics card (the one closest to the cpu).

Each display registers with AMD CCP but not at the same time.

I'm using a an Apple DP to DVI converter that I had laying around - I think its active rather than passive.
(12-14-2011, 08:36 PM)SnyderMan Wrote:
(12-14-2011, 07:41 PM)windez Wrote: Ok, what monitors are you using and what is the exact name of the DP adapter.

Also make sure your DVI adapter is getting power. Also make sure all three cables are connected to the SAME 6970, the one closest to your cpu.

Also, is the third monitor registering with amd CCP (the AMD Control Center)?
Also I'm curious as to whether that as an active or passive adapter.

I'm using three Planar PX2710MW's. All three are plugged into the same graphics card (the one closest to the cpu).

Each display registers with AMD CCP but not at the same time.

I'm using a an Apple DP to DVI converter that I had laying around - I think its active rather than passive.

http://www.overclock.net/t/761135/eyefin...ort-to-dvi

ok so it looks like the apple dp to dvi is the issue

I'll order a new adapter online and report back if it solves the issue.
Reply


Messages In This Thread
RE: AMD 6970's Eyefinity Three Monitor Setup Problem - by SnyderMan - 12-14-2011, 08:36 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)