You need to Read the rules and Join the forums before you can post.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
I'm so close so please help me! Solved
08-09-2011, 07:25 AM,
#21
RE: I'm so close so please help me!
Clear CMOS again and see what other error you got?

In case CMOS doesn't work, just drain all your capacitors with the method I mentioned above. Let the computer shut off, flip the switch and then hold the power button for 30s.
Laptop: MacBook Pro 13"
Case: Drawer turned to case CPU: Intel Core i3 2100 CPU Cooler: Stock brah GPU: EVGA GTX 460 HDD: Corsair Nova 32GB Motherboard: GA-Z68MA-D2H-B3 Z68 RAM: Ripjaw 8GB 1600 Optical Drive: Don't need PSU: 620W Antec Neo ECO. Operating System: OS X Lion/ Windows 7x64
Reply
08-09-2011, 07:33 AM,
#22
RE: I'm so close so please help me!
(08-09-2011, 06:50 AM)Andrew J Wrote: Absolutely nothing on the monitor still?

It's getting something. The monitor doesn't say no signal like it did before but it's black. Like I said I have a new error code and it appears to go through more codes on the motherboard aka it's taking longer to get an error code.

Currently I'm at work and won't be able to check anything out till I get off at 3 PM eastern U.S.

PS: Thanks again and good morning!!!
Reply
08-09-2011, 03:28 PM, (This post was last modified: 08-09-2011, 03:30 PM by shystie1.)
#23
RE: I'm so close so please help me!
(08-09-2011, 07:25 AM)van13330gg Wrote: Clear CMOS again and see what other error you got?

In case CMOS doesn't work, just drain all your capacitors with the method I mentioned above. Let the computer shut off, flip the switch and then hold the power button for 30s.

I just got home from work and tried that and it didn't work. Sad
(08-09-2011, 06:50 AM)Andrew J Wrote: Absolutely nothing on the monitor still?

It goes from no signal to when I turn on the PC to black screen.

Huh
Reply
08-09-2011, 04:06 PM,
#24
RE: I'm so close so please help me!
Are you on hdmi or vga right now? Normally when you haven't install any drivers for graphics card yet, you need to use vga first.
Laptop: MacBook Pro 13"
Case: Drawer turned to case CPU: Intel Core i3 2100 CPU Cooler: Stock brah GPU: EVGA GTX 460 HDD: Corsair Nova 32GB Motherboard: GA-Z68MA-D2H-B3 Z68 RAM: Ripjaw 8GB 1600 Optical Drive: Don't need PSU: 620W Antec Neo ECO. Operating System: OS X Lion/ Windows 7x64
Reply
08-09-2011, 04:24 PM,
#25
RE: I'm so close so please help me!
(08-09-2011, 04:06 PM)van13330gg Wrote: Are you on hdmi or vga right now? Normally when you haven't install any drivers for graphics card yet, you need to use vga first.

I don't love you but I really want to thank you! lol

I have the bios up my VGA display! I tried that before but it didn't work but for some reason it does now!!! Who cars it's working!!Thank youkyou everyone so much!!! I can't you enough!!!

So now it's asking me to either

Run set up
or
default values and continue

Which one?

Thanks!! Big Grin
Reply
08-09-2011, 04:47 PM,
#26
RE: I'm so close so please help me!
It doesn't really matter, I'd just run the setup and manually make sure your DRAM voltage and speed is set to what it should be.
Your friendly forum administrator.
Reply
08-09-2011, 06:16 PM, (This post was last modified: 08-09-2011, 06:17 PM by MathieuB.)
#27
RE: I'm so close so please help me!
Then set your boot priority to your DVD (or Blu-Ray) Drive 1st, put your Windows disk in it, reboot, install Windows, set your boot priority to your HDD (or SSD if you have one) first after Windows reboot and enjoy Big Grin
Laptop: MSI GS30 Shadow-045 Dimensions: 12.6" x 8.9" x 0.8" 2.65lbs CPU: Intel Core i7-4870HQ Quad-Core + Hyper-Threading OC 2.5-3.9GHz RAM: 16GB DDR3 1600MHz Video Card: Intel Iris Pro 5200 Storage: 2x128GB SDD RAID0 Audio: ASUS Xonar U3 USB Sound Card + Audio-Technica ATH-M50 headphones Screen: 13.3" - 1920 x 1080 IPS + 27" Dell P2715Q IPS 3840 x 2160 Keyboard: Filco Majestouch MX Cherry Blue Mouse: Logitech MX518
Reply
08-09-2011, 08:38 PM,
#28
RE: I'm so close so please help me!
I'm glad that it worked out for now. Good luck with setting things up!

I ran into a similar situation when setting up my HTPC. It made me scratch my head for awhile then I finally figured that out so I thought you might experience the same thing and you did haha!
Laptop: MacBook Pro 13"
Case: Drawer turned to case CPU: Intel Core i3 2100 CPU Cooler: Stock brah GPU: EVGA GTX 460 HDD: Corsair Nova 32GB Motherboard: GA-Z68MA-D2H-B3 Z68 RAM: Ripjaw 8GB 1600 Optical Drive: Don't need PSU: 620W Antec Neo ECO. Operating System: OS X Lion/ Windows 7x64
Reply
08-09-2011, 08:44 PM, (This post was last modified: 08-09-2011, 08:44 PM by MathieuB.)
#29
RE: I'm so close so please help me!
And that's one of the reasons that explains why we're (we=this awesome community!) here to help Smile So that minor issues that aren't actually defective parts can be fixed without you wasting your time and money to return them when it's not necessary. Try doing that with an HP or DELL that doesn't work out of the box Wink
Laptop: MSI GS30 Shadow-045 Dimensions: 12.6" x 8.9" x 0.8" 2.65lbs CPU: Intel Core i7-4870HQ Quad-Core + Hyper-Threading OC 2.5-3.9GHz RAM: 16GB DDR3 1600MHz Video Card: Intel Iris Pro 5200 Storage: 2x128GB SDD RAID0 Audio: ASUS Xonar U3 USB Sound Card + Audio-Technica ATH-M50 headphones Screen: 13.3" - 1920 x 1080 IPS + 27" Dell P2715Q IPS 3840 x 2160 Keyboard: Filco Majestouch MX Cherry Blue Mouse: Logitech MX518
Reply
08-09-2011, 09:38 PM,
#30
RE: I'm so close so please help me!
I'm on it right now and running great! Smile

Thank you again everyone.

I plain on hanging around some and learning some more. Hopefully one day I will be able to help some people out like you guys did for me.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)