You need to Read the rules and Join the forums before you can post.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
I'm so close so please help me! Solved
08-08-2011, 08:06 PM, (This post was last modified: 08-08-2011, 08:07 PM by shystie1.)
#11
RE: I'm so close so please help me!
(08-08-2011, 07:58 PM)MathieuB Wrote: If you haven't done it yet, make sure to "Clear CMOS". It's always worth a shot.

You just press the button for that right?? If so did and nothing.
(08-08-2011, 07:45 PM)Andrew J Wrote: Make sure it's all the way in? Tongue

Another thing to consider: Do you have the molex connector plugged in right above the top PCI-e slot?

Is that the little plasic clip to secure the Graphic card. If so I have latched over.
Reply
08-08-2011, 08:13 PM, (This post was last modified: 08-08-2011, 08:13 PM by Andrew J.)
#12
RE: I'm so close so please help me!
No, it's a power connector north of your PCI-e slots. If needed I'll circle it on Newegg's motherboard picture.
Your friendly forum administrator.
Reply
08-08-2011, 08:25 PM,
#13
RE: I'm so close so please help me!
(08-08-2011, 08:13 PM)Andrew J Wrote: No, it's a power connector north of your PCI-e slots. If needed I'll circle it on Newegg's motherboard picture.

??? # Please

http://www.flickr.com/photos/12699314@N04/6023694347/

http://www.flickr.com/photos/12699314@N0...otostream/

Thanks again!
Reply
08-08-2011, 08:26 PM,
#14
RE: I'm so close so please help me!
#44 is the connector that Andrew is referring to.
Laptop: MSI GS30 Shadow-045 Dimensions: 12.6" x 8.9" x 0.8" 2.65lbs CPU: Intel Core i7-4870HQ Quad-Core + Hyper-Threading OC 2.5-3.9GHz RAM: 16GB DDR3 1600MHz Video Card: Intel Iris Pro 5200 Storage: 2x128GB SDD RAID0 Audio: ASUS Xonar U3 USB Sound Card + Audio-Technica ATH-M50 headphones Screen: 13.3" - 1920 x 1080 IPS + 27" Dell P2715Q IPS 3840 x 2160 Keyboard: Filco Majestouch MX Cherry Blue Mouse: Logitech MX518
Reply
08-08-2011, 08:30 PM,
#15
RE: I'm so close so please help me!
(08-08-2011, 08:26 PM)MathieuB Wrote: #44 is the connector that Andrew is referring to.

OK. Plug it the power supply??
Reply
08-08-2011, 08:33 PM,
#16
RE: I'm so close so please help me!
Yes, you'll want to plug in a 4-pin molex power connector into that #44 power socket.
Laptop: MSI GS30 Shadow-045 Dimensions: 12.6" x 8.9" x 0.8" 2.65lbs CPU: Intel Core i7-4870HQ Quad-Core + Hyper-Threading OC 2.5-3.9GHz RAM: 16GB DDR3 1600MHz Video Card: Intel Iris Pro 5200 Storage: 2x128GB SDD RAID0 Audio: ASUS Xonar U3 USB Sound Card + Audio-Technica ATH-M50 headphones Screen: 13.3" - 1920 x 1080 IPS + 27" Dell P2715Q IPS 3840 x 2160 Keyboard: Filco Majestouch MX Cherry Blue Mouse: Logitech MX518
Reply
08-08-2011, 08:39 PM, (This post was last modified: 08-08-2011, 09:14 PM by shystie1.)
#17
RE: I'm so close so please help me!
(08-08-2011, 08:33 PM)MathieuB Wrote: Yes, you'll want to plug in a 4-pin molex power connector into that #44 power socket.

I had it connected earlier when I had the 2 graphic cards and when I just tried it again the same results.

No dice!


OK something different happened but now I get a new code 0E which mean " Microcode not found "

Now I really going crazy!!
Reply
08-08-2011, 10:12 PM, (This post was last modified: 08-09-2011, 01:50 AM by van13330gg.)
#18
RE: I'm so close so please help me!
How many beeps do you get from motherboard?

Try to turn your computer off, flip the power switch on the back of your power supply off. Press and hold your power button for 30 seconds. Wait a bit then turn everything back on.

If all that don't work then your motherboard might be defective. I would contact customer service about this.
Laptop: MacBook Pro 13"
Case: Drawer turned to case CPU: Intel Core i3 2100 CPU Cooler: Stock brah GPU: EVGA GTX 460 HDD: Corsair Nova 32GB Motherboard: GA-Z68MA-D2H-B3 Z68 RAM: Ripjaw 8GB 1600 Optical Drive: Don't need PSU: 620W Antec Neo ECO. Operating System: OS X Lion/ Windows 7x64
Reply
08-09-2011, 06:25 AM,
#19
RE: I'm so close so please help me!
(08-08-2011, 10:12 PM)van13330gg Wrote: How many beeps do you get from motherboard?

Try to turn your computer off, flip the power switch on the back of your power supply off. Press and hold your power button for 30 seconds. Wait a bit then turn everything back on.

If all that don't work then your motherboard might be defective. I would contact customer service about this.

Did you see that I'm getting a new code 0E which mean " Microcode not found "?

So far I haven't received the other code and no beebs.

Thanks for the help.
Reply
08-09-2011, 06:50 AM,
#20
RE: I'm so close so please help me!
Absolutely nothing on the monitor still?
Your friendly forum administrator.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)