You need to Read the rules and Join the forums before you can post.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Screws for the MB
12-10-2010, 07:03 PM,
#1
Screws for the MB
ok, i find the most annoying and frustrating part to building a comp is screwing in the tiny screws on the mb. especially because its hard to screw in a few of the screws near the back of the computer with a screwdriver. how do you guys deal? am i the only one that finds this annoying? is it just my case or the location of the screws on my mb? just curious. oh and i have finished the build. but thinking about in the future. Smile. appreciate any hints and tips
Reply
12-10-2010, 07:14 PM,
#2
RE: Screws for the MB
I have a special screwdriver. Its about 3-4" long and you just put pressure on the top and spin the body w other hand. The top rotates independently. I do hate putting those in also. Guess thats why I got to do it like 20 times with this build I just did trying to troubleshoot my stupid mistake.
Reply
12-11-2010, 03:14 AM,
#3
RE: Screws for the MB
Tilt your case on its side, it should make it easier.
Your friendly forum administrator.
Reply
12-11-2010, 01:30 PM,
#4
RE: Screws for the MB
Just making sure, you do put the motherboard risers (gold screws that you screw into the case) and you're screwing the motherboard screws into them, right?

Also, make sure to not screw the motherboard too tight, that will damage it.
Laptop: MSI GS30 Shadow-045 Dimensions: 12.6" x 8.9" x 0.8" 2.65lbs CPU: Intel Core i7-4870HQ Quad-Core + Hyper-Threading OC 2.5-3.9GHz RAM: 16GB DDR3 1600MHz Video Card: Intel Iris Pro 5200 Storage: 2x128GB SDD RAID0 Audio: ASUS Xonar U3 USB Sound Card + Audio-Technica ATH-M50 headphones Screen: 13.3" - 1920 x 1080 IPS + 27" Dell P2715Q IPS 3840 x 2160 Keyboard: Filco Majestouch MX Cherry Blue Mouse: Logitech MX518
Reply
12-11-2010, 08:49 PM,
#5
RE: Screws for the MB
(12-11-2010, 01:30 PM)MathieuB Wrote: Just making sure, you do put the motherboard risers (gold screws that you screw into the case) and you're screwing the motherboard screws into them, right?

Also, make sure to not screw the motherboard too tight, that will damage it.

yup. standoffs are there. just was looking for some tips on making the process of putting in those screws easier. for example, last time i took my mb out to put my cpu cooler in i lost one of my screws. no big deal but it was rly annoying trying to get it out. anyways thanks for the tips andrew and perry. i hope a few more come in Smile
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)