You need to Read the rules and Join the forums before you can post.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Asrock FM2A88X-ITX Tip for SMA WiFi Antenna Cables
02-07-2014, 11:30 AM,
#1
Asrock FM2A88X-ITX Tip for SMA WiFi Antenna Cables
This is about attaching the very tiny WiFi Antenna cables to an Asrock FM2 board.
These WiFi cards are found on other Boards as well, but I am doing a build using the ASROCK Board in the title.
First tip: These connectors are TIGHT! I tried pushing them on while the card was on the board. Don't do it.
Next tip: Take the card out. It is held in with ONE screw. Once you get it out you can very easily push these connectors on.
Next: Be vary careful to line the little tiny pins up before pressing.
Once they are pressed in they click a little bit.
Now put the card back in.
Point is: Don't follow the directions in the manual. They show pushing the connectors on with the card in the board.
Hope this helps somebody.
Tim
Tim S. CRNA
My Build (Jan 2011): Win 7 Pro Intel i5 760 2.8 Ghz (No OC) MOBO: Asus P7P55DE-Pro CASE: Antec 900 - 4 fans GPU: Sapphire Radeon 5770 RAM: 4 Gb Corsair DDR3 1600 PSU: OCZ 750W SDD: OCZ 60 Gb HDDs: 2x Samsung F3 1Tb ODD: Sony Optiarc BD RW MONITOR: Samsung 24" 1080p My OTHER Machine: OSX 10.6.6 iMac 27" Intel i5-760 2.8Ghz
Reply


Messages In This Thread
Asrock FM2A88X-ITX Tip for SMA WiFi Antenna Cables - by timcrna - 02-07-2014, 11:30 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)