You need to Read the rules and Join the forums before you can post.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Raid configuration - ctrl-I not working
10-22-2011, 07:36 PM,
#1
Raid configuration - ctrl-I not working
Hi guys,
I have just recently done my second build based on the tier 6 gaming pc

Mobo-asrock z68 extreme4 gen3
CPU- i5 2500
Gpu - 2 x asus 6870 (for xfire)
Hdd - 2 x Samsung 2tb (for raid 1)
Psu - antec 750
Ram - patriot ddr3 1600
Os- windows 7 64 bit

Hardware all seems to be ok and boots successfullly- I am now trying to configure a hardware raid 1 with the 2 samsung 2tb drives but have come unstuck - after going into the bios (uefi) and checking both HDDs are shown I turned on "raid" configuration saved and quit. Seemed to work, I now see the drive post screen with the two drives and the "press ctrl-I to configure raid settings" . However when
I press ctrl-I so as to configure the array nothing happens, system simply continues to boot - I have tried a number of times, rebooting, restoring bios and redoing raid setting in bios etcbutnothing seems tobe working - I even checked the keyboard to make sure the "I" key was working - if anyone can help out I would be grateful
Cheers
Reply


Messages In This Thread
Raid configuration - ctrl-I not working - by Armstrongjn - 10-22-2011, 07:36 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)